CEWELD E DUR 25U

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Beklede elektrode voor het oplassen van Stellite 25 lagen

classification

EN ISO

14700: ~E Co1

DIN

8555: E 20-UM-300- CTZ

Toepassingen

Bekleding van klepzittingen, Gasturbinecomponenten. Metaalbewerkingsgereedschappen zoals doorsteekpunten, vormgereedschappen en extrusiematrijzen die worden blootgesteld aan metaal op metaal slijtage in combinatie met thermische vermoeidheid.

Type

Beklede elektrode voor het oplassen van Stellite 25 lagen

Toepassingen

Bekleding van klepzittingen, Gasturbinecomponenten. Metaalbewerkingsgereedschappen zoals doorsteekpunten, vormgereedschappen en extrusiematrijzen die worden blootgesteld aan metaal op metaal slijtage in combinatie met thermische vermoeidheid.

Eigenschappen

CEWELD E DUR 25U is een op kobalt gebaseerde elektrode die bestand is tegen hoge schokbelasting, grote hitte, thermische schokken, hete corrosie, compressie, abrasie, erosie en vele andere vormen van aantasting. De neersmelt is bewerkbaar met hardmetalen gereedschappen.

Classification

EN ISO

14700: ~E Co1

DIN

8555: E 20-UM-300- CTZ

Geschikt voor

Valves in chemical and steam plants, Gasturbine components, Tong bits, Share blades, Hot forging and stamping tools, Hot dies, Aerospace industry, Turbo charger buckets, Hot liquid pumps etc.

Lasposities

Herdrogen

Not required

Analyse

C	Mn	Cr	Ni	Mo	Nb	V	Fe	W	Co	Cu	Al	Si	Ti	B	N
0.1	2	20	10	1			3	15	Rem.

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				25 HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

basic electrode for Haynes 25 and alloy L605

basic electrode for Haynes 25 and alloy L605

Packing info

E DUR 25U
Packaging	KG/unit	EanCode

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.