CEWELD E DUR 25U

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Cobalt-based thermo shock resistant alloy for overlay applications. ( E Z Co1, Dur 25 )

classification

EN ISO

14700: ~E Co1

DIN

8555: E 20-UM-300- CTZ

Applications

Cladding valve seats, Gasturbine components. Metal working tools like piercing points, forming tools and extrusion dies that are exposed to metal on metal wear in combination with thermal fatigue. Also furnace hardware

Type

Cobalt-based thermo shock resistant alloy for overlay applications. ( E Z Co1, Dur 25 )

Applications

Cladding valve seats, Gasturbine components. Metal working tools like piercing points, forming tools and extrusion dies that are exposed to metal on metal wear in combination with thermal fatigue. Also furnace hardware

Properties

CEWELD E DUR 25U is a Cobalt based electrode developed to resist high impact load, high heat, thermal shock, hot corrosion, compression, abrasion, erosion and many other forms of attack. The weld deposit is machinable with carbide tools.

Classification

EN ISO

14700: ~E Co1

DIN

8555: E 20-UM-300- CTZ

Suitable for

Valves in chemical and steam plants, Gasturbine components, Tong bits, Share blades, Hot forging and stamping tools, Hot dies, Aerospace industry, Turbo charger buckets, Hot liquid pumps etc.

Welding positions

Redrying

Not required

Analysis

C	Mn	Cr	Ni	Mo	Nb	V	Fe	W	Co	Cu	Al	Si	Ti	B	N
0.1	2	20	10	1			3	15	Rem.

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				25 HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

basic electrode for Haynes 25 and alloy L605

basic electrode for Haynes 25 and alloy L605

Packing info

E DUR 25U
Packaging	KG/unit	EanCode

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.