… note that while Alloy 600 provides excellent corrosion resistance, its performance can be affected by various factors such as temperature, …

… prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding  … Cast aluminium special repairs, Al99,0 …

… things that effects the quality, some wires have strength of more than 1500 MPa and some wires only have 600 MPa but why is this so important? …

… Scale resistance up to 1150ºC, crack and wear resistant, suitable for rebuilding wornout parts. …

… Weld metal provides optimum strength and oxidation resistance above 1150 °C ( 2100 °F), especially when welding on base metals of …

… anodizing. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, …

… be kept below 15 kJ/cm and interpass temperature between 100 and 150ºC. … Reh < 690 MPa Iso 15608: 2.2 u 3.2 ( 460 < Reh ≤ 690(700) MPa …

… covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, …

… seawater. Welding instructions: - Preheating for sections >6 mm from 150 till 300 ºC is recommended. Use the normal standard welding …

… Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), …