Excellent weld puddle manipulation, superior out-of-position welding. Particularly suited for MAG orbital welding applications and all-position welding on ceramic backing. Low spatter loss, easy slag removal. Suitable for economic welding of Mo-steels up to 500°C.

Excellent weld puddle manipulation with fast freezing slag, superior out-of-position welding also at higher currents. Using temperature down to - 40 °C. Particularly suited for MAG-orbital welding and all-position welding on ceramic backing. Extreme low spatter loss, easy slag removal and hydrogen content below 3 ml/100gr. even after long unconditioned storage.

Absolute crack resistant weld metal conditioned by the high-basic slag combined with ultra low hydrogen content (HD< 3 ml/100g). High mechanical properties also for single-sided welding on ceramics. X-ray-proof seams with low spatter loss. Suitable for high-carbon steels and  welding critical  mixed combinations. Metallurgical ideal filler metal for repair and production welding as well as for buffer layers.

AA B500 is a seamless high basic flux cored wire for extreme offshore requirements
at sub zero temperatures down to - 60 °C (-80°C). Excellent welding properties.
Therefore, suitable for the economic processing of high-strength, low temperature fine-grained
structural steels with Rp0,2 > 500 MPa. Low hydrogen content HD< 3 ml/100g even after long storage.

Absolutely crack resistant weld metal conditioned by the high-basic slag in combination with extreme low hydrogen content. Therefore, suitable for the economic processing of high-strength, low temperature fine-grained structural steels with Rp0,2 > 690 MPa. X-ray-proof seams with low spatter loss. Stable, mechanical property values of the weld metal also at high heat input up to 18 kJ/cm.

CEWELD OA S 71 T8 is able to Weld out of position at extreme currents and offers a Low hydrogen weld deposit. Excellent slag removal and protective gas is not required. High impact strength at low temperatures combined with excellent mechanical properties within a wide range of heat inputs.
Usable under AWS D1.8 for use on Demand Critical welds.

CEWELD AA 307P zeigt einen feinen Tropfenübergang und stabilen Lichtbogen ohne Spritzerverluste. Ausgezeichnete Produktivität und Schweißbarkeit in allen Positionen durch die schnellerstarrende Schlacke, bessere Benetzungseigenschaften im Vergleich zu Massivdrähten. Hervorragende Schweißgutqualität und Röntgentauglichkeit. Die Wärmebehandlung nach dem Schweißen (PWHT) kann problemlos durchgeführt werden.

CEWELD® AA 308H zeigt einen glatten Tropfenübergang und einen stabilen Lichtbogen ohne Spritzerverluste. Hervorragende Produktivität und Schweißbarkeit, bessere Benetzungseigenschaften im Vergleich zu Massivdrähten, ausgezeichnete Schweißgutqualität und Röntgenfestigkeit sowie hervorragende Schlackenentfernung, hervorragend geeignet für den Einsatz in horizontaler Position.

CEWELD AA 309LMoP ist ein Fülldraht mit Schlacke für hochproduktives Schweißen in allen Positionen. Hervorragend geeignet für den Einsatz auf keramischen Badsicherung. Die Schlacke ist selbstablösend und bietet zusätzlichen Schutz, um röntgensichere Schweißnähte praktisch ohne Spritzer zu erhalten. Bessere Benetzungs- und Schweißeigenschaften mit höherer Produktivität im Vergleich zu Massivdrähtenwerden erzielt.

For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. AA 310B has good general oxidation resistance, especially at high temperatures, due to its high Cr content. The alloy is fully austenitic and is therefore sensitive to hot cracking. The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case shall a temperature of 1000°C be exceeded. This alloy can withstand relatively severe thermic shock, and is superior to type 309L