… the addition of Molybdenium.The deposit is homogenous and suitable for heat treatment (PWHT).  … St37, St42, St35.8, St45.8, 15Mo3, HI, HIII, …

… Can be welded crack free by preheating approxiamately 450°C and keep that also as interpass …

… X-ray soundness. When welding, care should be taken to minimize the heat input, because materials of this composition have a tendency to …

… for the number of layers that can be applied in case of rebuilding but heat input should be kept low (as for Mn steel). The weld deposit is …

… cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding. … Al99,0 Al.99,5 Al.99,7 E-Al., 99,5, …

Merci …

… Austenitic filler metal for stabilized and non-stabilized CrNi steels. Heat resistant up to 350°C. Excelent toughness properties down to …

… Designed for welding heat resistant steels to sustain working temperatures upto 650 ˚C … For …

… and corrosion. Due to the high chromium content this alloy offers high heat resistance as well. The spray deposit is only machinable by … wire for metal spray on a C-Cr-B- carbide basis for extreme hard and heat resistant deposits on parts subject to severe mineral abrasion. …

… most commercial copper grades. Thicker sections than 5 mm should be preheated up to approximately 500 °C. … Cladding steel, Grey cast iron, …