… words: you can always rely on us and our partners. We are THE FILLER METAL SPECIALIST … Dealer policy …

… 4370 or OA MnCr is recommended in case of old layers or critical base metals.. … 60-70 HRc Hardfacing wire used in mining, agriculture and …

… of SP 1.4370 exhibit low shrink and are recommend for internal diameters, particularly where thick coatings are needed. Using the … than SP 1.4316 coatings, but not as thick as SP 420-B coatings. … Metals spray wire with good corrosion resistance and low shrink factor, recommended for inside diameters. … SP 1.4370 … 14919: 5.12 …

… The weld metal has excellent strength and oxidation resistance at high …

… Nb carbides. The choice for the buffer layer is depending on the base metal and not always necessary. If applied correctly the hardfacing …

… drop transfer and stable arc with no spatter losses. Excellent weld metal quality and X-ray soundness. … 1.4429, 1.4434, 1.4435, 1.4436, …

… Carbide deposits. The deposit gives a extreme high hardness, all spray metal requires no buffer layer except on materials considered critical. … is only machinable by grinding.  … High-alloyed tubular wire for metal spray on a C-Cr-B- carbide basis for extreme hard and heat …

… Because of the high high chromium and aluminum content it has excelent metal dusting corrosion and oxidation resistance. Due to its excellent … in Chemical process industry, this alloy has a much higher Metal Dust resistance than our CEWELD NiCro 602 CA … NiCro 603 … A …

… Usually combined with AlSi12 or AlSi5 filler metal. … Brazing for Aluminium and Aluminium Alloys with a working … range from 350 to 550 °C. Usually combined with AlSi12 or AlSi5 filler metal. … Alu-Flux … 18496: FL20 …

… cracking due to the high Mo content. During build-up welding, the weld metal already achieves approximately the composition of ASTM 316 in the …