… silicon, and phosphorus are controlled to lower levels in this alloy. Suitable only in down-hand positions. … 1.4465, 1.4500, 1.4505, 1.4506, …

… considered critical. In this Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to heavy abrasion. The interpass …

… steels with yield strength > 690 MPa. Crack resistant and well suited for low-temperatures, ductility down to -60°C. Preheating, … 1.8914, 1.8927, 1.8931, 1.8928, 1.7147, 1.7149, 1.8734 S620Q, S620QL, S690Q, S690QL, S620QL1-S690QL1, 20MnCr65, 28CrMn4-3 L480 - L550, X65, X80, …

… provides good impact toughness down to -50°C and is especially suitable for use in the offshore industry. … S255, S550, P355NL1, …

… and or semi–automatic applications. Weldable with Co2 and Mix gas. Suitable for creep resistant service for working temperatures up to 600 …

… in all positions. Easily removable slag, versatility and manuality; suitable for welding zinc-coated plates as well. Completely free of …

… and parts that have to be soft annealed above 900 degrees Celsius. Suitable for use with FL 155 agglomerated flux or with FL CS155 fused …

… composition where Molybdenum % is reduced to form a hybrid alloy between 308H and 316H, operates in temperatures up to 800 °C. CEWELD® …

… In this  Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to extreme heavy abrasion and corrosion. …

… resistance is better than AISI 316 due to the high Mo. content. Suitable for use up to 400 °C. The weld deposit is non magnetic. … …