… resistance to impact and bending. SP 80/20 NiAl can be machined and ground to a finish of 5 micro inches. … Build up material for dimensional …

… (Mig brazing as well) • The weld metal is a Copper- Silicon bronze • Sound, pore free deposits on ferrous and non-ferrous base materials • …

… variety of difficult applications. Uses include fabricated equipment found in chemical and petro- chemical processing, pulp and paper …

… is therefore sensitive to hot cracking. The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case …

… austenitic stainless steels operating at high temperatures (500-800°C) under long term creep conditions. This filler metal can also be used …

… flow and wetting characteristics at low working temperature of around 1050 °C and the deposition rate is 20-30% higher than with …

… offers a easily machinable weld deposit with high ductility and no undercut. … Welding ductile, grey and malleable cast irons. Ni 99 can …

… • High quality alloyed copper wire • Sound, pore free deposits and good electrical conductivity • Excellent …

… as indicated by so-called ‘type IV’ failure in transverse weld creep tests. … 9%Cr, 1%Mo, VNb 1.7389, 1.7386, 1.4922, 1.4935, 1.4904, …

… compared to solid wires. Ductile weld metal quality and X-ray soundness and ferrite level between 30 and 50 (FN). Excellent for use …