… fusion boundary. Alloy C276 is possibly a more economic alternative depending on the required properties in this situation. … duplex, …

… fusion boundary. Alloy C276 is possibly a more economic alternative depending on the required properties in this situation. … duplex, …

… yield strength of Rp0,2 550 MPa (80 ksi). As welding flux we recommend our type FL 155, classification S A FB 1 55 AC H5. … Materials: …

… carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usually already achieved in the first …

… A Buffer layer with CEWELD® OA 4370 or CEWELD® OA MnCr is recommended in case of old layers or critical base metals.. Equivalent in …

… Stainless deposit with low carbon content. Low heat input is recommended to avoid pronounced grain coarsening. Absence of stabilization …

… Coatings of SP 1.4370 exhibit low shrink and are recommend for internal diameters, particularly where thick coatings are … spray wire with good corrosion resistance and low shrink factor, recommended for inside diameters. … SP 1.4370 … 14919: 5.12 …

… welding must be done in a low heat input procedure and is not recommended for multi-pass applications … 1.4512,  X2CrTi12,  AISI 409, …

… or chipping of. In case of sensitive base material preheating is recommended at 300 - 400 °C. Old Hardfacing layers should be removed, clean …

… to avoid cracking. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old layers. Weldable without …