… excellently suitable for root runs in vertical up position in pipe welding. The slag is self detaching and the special red coating was …

… CEWELD® SG CrMnMo EN 4332: FE-WL1805 (8CrMnMo12-4-9) wire is used for welding matching, and similar, composition base materials. … 30CrMoV12, …

… low level of free carbon and enables the filler metal to be used with Nickel 201. The weld metal has good corrosion resistance, particularly in alkali’s. … CEWELD® NiTi 3 is developed for welding and cladding Nickel 200 and Nickel 201. This alloy is also … include joining Nickel 200 and 201 to stainless steels, copper-nickel alloys, and Monel alloys. It is also used for joining Monel alloys and …

… plate less than 1/4 in. thick to prevent oxidation. Gas Requirements. Welding-grade argon (99.999 percent purity) usually is chosen for … gas supply should not be more than -60 degrees F (-51 degrees C). … Welding Zirconium alloys in general but also for successfully weld zirconium to titanium, …

… of intergranular corrosion. The higher silicon content improves the welding properties such as wetting and results in a bright seam. … ISO …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …

… structure. This is the hardest of the standard cobalt-base alloys. It has a high resistance to corrosion (especially to reducing …

… requirements at sub zero temperatures down to -60 °C. Excellent welding properties.  Yield strength < 600 MPa. Low hydrogen content  …

… Het "Welding Solution Center" toont het summum van de meest innovatieve …

… crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub zero temperatures …