… abrasion combined with impact. The deposit gives already a very good hardness in the first layer. The choice for the buffer layer is depending on the base metal and not always necessary.  … 55-57 HRc hardfacing alloy against shocks and mineral wear, rollers and crushers, …

… FL 400 is an agglomerated flux for SAW welding to obtain increased hardness with low and un-alloyed sub arc wires. Basicity: about 1,1 … rod ends, mining parts, excavator parts, rolling bars, pressure rolls, cement rollers, dredging parts, coupling parts, crushing hammers. etc.. …

… to type 304, high mechanical properties and good weldability, work hardening and cold-tough to -196°C. … 19% Cr / 9% Ni / 7% Mn, ISO …

… weld metal composition of 12% Chromium. These weld deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, …

… comparable or surpassing Waspaloy and approaching R-41 and Alloy 263 hardenable High temperature dynamic applications … HAYNES® 282® alloy, …

… and corrosion at high working temperatures upto 900°C. Crack free hard facing deposit against severe shock and impact. … CoCr-E  Co1 …

… even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of … protective gas.Corresponding electrode: CEWELD® Dur 62 S … 61-64 HRc hardfacing alloy, Cement, Mineral mixing, hammers, coke wear plates etc. … OA 62L … …

… T91’ T92 CrMo steels modified with small additions of Tungsten and Vanadium to give improved long term creep properties. These consumables …

… porous slag (excellent for narrow gabs where the slag is often hard to remove). … Reh ≤ 420 MPa ISO 15608: 1.1, 1.2 1.0426, 1.0429, …

… good toughness and strength properties. The weld metal also work hardens. … ISO 15608: 11 (0,25 % < C ≤ 0,85 %)  Type: 29% Cr, 9%Ni  … 25CrMo4, 42CrMo4, 50CrMo4, 1.5223, 1.7218, 1.7225, 1.7228, Armox, Hardox … 312 … A 5.9: ER312 … 14343-A: G 29 9 …