… resistance over an ER409 alloy. Single pass welds on light gage base metal or welds with preheat do not usually require PWHT. … 1.4000, …

… °C and the deposition rate is 20-30% higher than with comparable tube metal. It is easy to use and inexperienced welders will have no …

… Austenitic filler metal for stabilized and non-stabilized CrNi steels. Heat resistant up …

… Special alloyed copper wire for Mig welding. The weld metal is a Cu-Al bronze. Sound, pore free deposits. … Suitable for … Joining steel to copper alloys, cast iron and or bronze. Excellent for metal spraying. Ship propellers, shipbuilding, pump building, shafts, …

… production process the hydrogen content is below 3ml/100g weld metal even after long storage in unconditioned condition. … Type …

… High   strength   Manganese-Molybdenum-  alloyed filler metal for flame welding with extreme good flowing properties without …

… in the molten weldpool and become part of the weld deposit, Metal core fluxcored wires are recommended in spray arc to obtain the …

… The filler metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing …

… tensile strenght and a high resistence against sliding wear of metallic objects.It has a good retention of hardness up to 650°C and is …

… Due to the high resistance to cracking and toughness, all spray metal requires no buffer layer except on materials considered critical. …