… position with high speed and deep penetration. Due to the wood powder based coating the weld puddle is super fast freezing and therefore …

… Cu-Al-Ni bronze. Sound, pore free deposits on ferrous and non-ferrous base materials. Excellent resistance to cavitations and stress …

… resistance over an ER409 alloy. Single pass welds on light gage base metal or welds with preheat do not usually require PWHT. … 1.4000, …

… layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old Hardface-layers. … 59-62 HRc hardfacing alloy for …

… electrical welding on AC as well as on DC. The carbon content of the base metal should not exceed 0,45 % in order to avoid lack of fusion.  …

… low level of free carbon and enables the filler metal to be used with Nickel 201. The weld metal has good corrosion resistance, particularly … in alkali’s. … CEWELD® NiTi 3 is developed for welding and cladding Nickel 200 and Nickel 201. This alloy is also suited for surfacing of steel. …

… in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without protective gas … 63-67 …

… -It is easier tot weld with ULTIMET wire than traditional cobalt-based alloys, allowing multiple layer build-ups with no pre-heating …

… repair sector due to its absolute insensitiveness for rust or diluted base metals. Hydrogen content: HD < 10ml/100g weld metal. … Reh ≤ 420 …

… Cu-Al-Ni bronze. Sound, pore free deposits on ferrous and non-ferrous base materials. Seawater, wear and corrosion resistance; for example … pressure. Especially suited for marine environments. The addition of nickel improves corrosion resistance in heated and rough seawater. … …