1. … of bijstaan in onze bedrijfsvoering, onder voorbehoud van geheimhoudingsverplichtingen. In reactie op een gerechtelijk bevel of om te …
  2. … feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …
  3. … is higher than 5%Cr-0.5%Mo steels requirements. To be used with shielding gas Ar+O2.   … For matching 9%Cr-1%Mo creep resisting martensitic …
  4. … grained structural steels up to 460 MPa yield strength. Excellent welding properties in combination with FL 155 high basic flux even in … parameter range and improved deposition rate. … Materials shipbuilding Unalloyed steels boiler steels pipe steels - Fine grain steels API-standard DIN A, B, D, E, AH 32 - EH 36 St 33, St 37-2 - St 52-3 H I, H III, …
  5. … strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures …
  6. … alloy excellently suitable for metal to metal wear. Machinable by grinding. … Knives, cutter blades, agriculture, glas industry, nozzle …
  7. … treatable. Thicker sections should be preheated (150°C) prior to welding. … AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, 3.3210, …
  8. … Attractive bead appearance without slag residues. Suitable for cladding and joining components against corrosion, high-heat and wear … FL 880.  … Cap layers for joining refractory Cr-Al-Si steels., cladding corrosion resistant overlays., Cladding heat resistant overlays (1100ºC), Cladding components in a …
  9. … 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age … NiCu30Fe, NiCu30Al, Monel 400, R405, alloy K500 and dissimilar welding between these alloys. … NiCu30Mn … A 5.14: ERNiCu-7 … 18274: S Ni …
  10. … hardness in the first layer. The choice for the buffer layer is depending on the base metal and not always necessary.  … 55-57 HRc …