… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrease 16% at 300°C and about 30% …

… abrasion combined with impact. The deposit gives already a very good hardness in the first layer. The choice for the buffer layer is … depending on the base metal and not always necessary.  … 55-57 HRc hardfacing alloy against shocks and mineral wear, rollers and crushers, Mineral and brick crushing industry, Screw conveyers, carbidge recycling etc. … OA 600 … 14700: T …

… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 16% at 300°C and about 30% at …

… even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of … protective gas.Corresponding electrode: Dur 62 S … 64-68 HRc hardfacing alloy, Cement, Mineral mixing, hammers, coke wear plates etc. … OA 62 … 14700: …

… with complex carbide structure. The deposit gives a extreme high hardness and is suitable for corrosion protection, homogeneous particle … The spray deposit is only machinable by grinding with diamond tools. … Cement industry, pumps, mixer blades, valves seals, bearings, magnetic …

… even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of … or old layers. Weldable without protective gas … 63-67 HRc hardfacing alloy ,Fan blades, Bucket lips, Mining, Cement, Mineral hammers, coke wear plates etc. … OA 63 … 14700: T Fe15 …

… and Powder HVOF DUR 1 (45/15). It contains a higher fraction of hard, brittle carbides than Powder HVOF DUR 6 (45/15), and has … heat and corrosion. It is also used for control plates in the beverage industry, pump vanes, bearing bushes and narrowneck glass mold plungers. Hardfacing of engine valves, pinch rollers in the metal-processing …

… FL 400 is an agglomerated flux for SAW welding to obtain increased hardness with low and un-alloyed sub arc wires. Basicity: about 1,1 … rod ends, mining parts, excavator parts, rolling bars, pressure rolls, cement rollers, dredging parts, coupling parts, crushing hammers. etc.. …

… good toughness and strength properties. The weld metal also work hardens. … ISO 15608: 11 (0,25 % < C ≤ 0,85 %)  Type: 29% Cr, 9%Ni  … 25CrMo4, 42CrMo4, 50CrMo4, 1.5223, 1.7218, 1.7225, 1.7228, Armox, Hardox … 312 Tig … A 5.9: ER312 … 14343-A: W 29 9 …

… abrasion resistance combined with heavy shocks, despite the high hardness several layers can be applied without any risk of braking out …