… of any welding consumable and procedure before use in the intended application.  The selection and use of specific products is …

… This results in lower hardness and strength values, which reduces the tendency to crack, especially if the weld seams are not …

… and will offer outstanding welding properties on both AC and DC+ Recommended for manufacturing and reconditioning cutting tools. … Cutting …

… not be deposited. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals.. … 60-70 HRc …

… The alloy has a low carbon content, making it particularly recommended where there is a risk of intergranular corrosion. … ISO 15608: …

… The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case shall a temperature of 1000°C be …

… coating structure, all spray metal requires no buffer layer. Recommended for coatings against erosion and corrosion. … Applications that …

… (X< 10 ppm) for temper embrittlement resistant applications. Recommended flux: FL 155 … 2,25% Cr, 1% Mo  1.7015, 1.7131, 1.7147, 1.7380, …

… already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without …

… Parkeren op het terrein Het Welding Solution Center beschikt over voldoende parkeerplaatsen. Een deel van de parkeerplaatsen is voorzien van …