… High manganese of this weld deposit reduces the possibility of micro fissures. High toughness at low temperatures (–269 °C). Heat- and high …

… with a thick rutile coating and a recovery of 150%. For joining and surfacing in mechanical engineering, body and wagon building as well as …

… of carbon, silicon, and sulfur to decrease the hot cracking and fissuring, while maintaining the resistance to corrosion. … Alloy 825 …

… Very good welding characteristics and not sensitive for cracks and fissures. High tensile strength with good corrosion and acid resistance. …

… creep strength are kept above the minimum considered necessary to ensure satisfactory performance. In this case, weldments will be weakest …

… steels or stainless steels to obtain a high temperature resistant surface against oxidation. … Cladding against high temperature, radiant …

… for economic production of creep resistant steels and pressure-hydrogen-resistant 2¼Cr1Mo-steels. … 2,25% Cr, 1% Mo  1.7015, …

… toevoer - Fit Up Bed Rollers / kolom en boom manipulatoren - Nieuwe Aquaforce elektrode voor lassen onder water - Metaal printen in 3D … …

… and wetting characteristics and high resistance to cracks and fissures. Extreme good deposition rate compare to MMA. High strength and …

… blankets the solidified weld during subsequent passes until the root surface temperature stays below 600 degrees F. Backup shielding also should be used on the back surface of sheet or plate less than 1/4 in. thick to prevent oxidation. …