… root welding. High-efficiency type for economic production of high-strength fine-grain structural steels up to 1100 MPa Yield Strength. Stable mechanical property values up to heat input of 10 kJ/cm. …

… Good flowing high strength Ni-brass alloy containing Nickel for more strength and bridging capability during brazing with excellent rebuilding …

… weld metal has properties similar to “Monel 400”. It has good strength and resists corrosion in many media, including sea water, salts … not age hardenable and when used to join Monel K-500 it has lower strength then the base metal.  … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel …

… and neutral environments, whereas the nitrogen allows superior strength at high temperatures. Therefore, this filler wire shows excellent … (most suitable temperature range is 850 - 1100 °C), high creep strength, very good resistance to isothermal and, particularly, cyclic …

… Weld metal deposited by SA Nicro 625 has high strength and extreme corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures. Flux FL 860 ESHC … SA Nicro 625 is …

…  materials.  The  weld deposit from Typ 15CrMoV6 provides  high  strength, actual strength being dependent on heat treatment  Preheat,  interpass …

… Extreme high tensile strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures with exceptional plasticity of the weld …

… Very high strength at elevated temperatures Strength is generally comparable or surpassing Waspaloy and approaching …

… ERTi-12. Grade 12 (Ti 0.8Ni0.3Mo) is an intermediate strength grade originally developed to provide enhanced crevice-corrosion … sometimes specified for pressure vessels or piping for its superior strength alone. … Titanium grade 12, Grade 7, Grade 2 and Grade 3 … …

… low hydrogen content. Well suited for the economic joining of high strength steels and cryogenic fine grain structural steels with Rp0,2 > … reach the optimal mechanical properties, the energy absorbed per unit length of weld 15 kJ/cm should not be exceeded. The working temperature …