… against sliding wear of metallic objects.It has a good retention of hardness up to 650°C and is non scaling up to 900° C thermo shock resistant and resistant to sudden changes of temperature.Work hardening. Not crack sensible.The number of layers can be done as …

… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 20% at 600 °C and has a nominal hardness of 49-53 HRc at room temperature. The weld deposit is high … and abrasion resistance, Thermo shock resistant and impact resistant, Hardfacing valves, Seats, Pumps, Knives, Plastic recycling …

… Austenitic deposit with strain hardening properties and no limits in the number of layers. The deposit … The weld deposit offers fair corrosion resistance and has strain hardening properties. This alloy should be applied at highest impact … crushing hammers, dredger teeth, rollers, blast furnace, mantles, Hardfacing manganese hard stee, buffer layers etc.. … SACW MnCr … …

… High C-, Cr- alloyed flux-cored wire electrode which forms extremely hard carbides for extremely hard deposits on parts subject to excessively heavy abrasive wear … or critical base metals.. Equivalent in SMAW: Dur 62S  … 60-64 HRc hardfacing alloy, Cement, Mineral mixing peddles, coke wear plates, Fan …

… 2400 HV Iron and Tungsten based hardfacing alloy containing 52-58% (depending on wire … Multi-layer deposits are not recommended due to the extreme high hardness. Fused tungsten carbide will guaranty a long life for several … mixer plates in the brick and clay industry and on decanter screws or hardfacing deep drilling equipment. … OA WC2 Fe … 14700: T Fe20 …

… be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usually already achieved … rollers, bucket and loader teeth, crusher jaws, buffer layers prior to hard facing. … OA 400 … 14700: T ZFe1 …

… Hardfacing alloy for cladding steel mill rollers, thermoshock resistant … for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface …

… HVOF-sprayed, very dense coatings can be achieved with extreme hardness of 800-1300 HV0.3 and adhesion strength of more than 70 MPa. … 5.2-5.8 g/cm³ Particle shape: preponderantly spherical Coating microhardness: 800-1300 HV0.3 Sales units: Particle size* (DIN EN 1274 3.3): … rods, slush pump piston rods, corrugating rolles, hydroturbine buckes, hardchrome replacement. … Powder 86104-CoCr-45 … 14232-1 WC-Co-Cr …

… Copper alloy, silver-alloyed-with a slightly higher percentage of phosphor, suitable … metal. High quality alloyed copper wire. The weld metal is a Copper-Silver alloy. Sound, pore free deposits and high electrical …

… maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first …