… spatter free welding with very low current. Due to the very low heat input and unique composition of Ni the transition zone will stay … case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down the cooling speed, in case you …

… resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low heat input and the interpass temperature should be limited to max. 150 …

… Proper weldings are subject to the recommended heat treatment. The deposit is resistant to seawater, thin acids and … C. and will offer scale resistance up to much higher temperatures. Preheating is recommended at 150 - 350° C. depending on the thickness of the base metal. Similar base metals should be pre-heated at 300° C to 400° C. … 1.4016, 1.4511, 1.4122 X6Cr17,  X3CrNb17, …

… resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low heat input and the interpass temperature should be limited to max. 150 …

… for welding grey, malleable, nodular and phosphorus cast iron. Preheat is not necessary. Heat input is low which favors limited heat affected zone. … GG, GGG Spheroidal Cast Iron, Diluted Cast Iron, …

… better galling resistance. Normally to obtain adequate ductility, preheat and post-weld heat-treatment are required . AA 410 is a martensitic stainless steel that is heat-treatable. It has a nominal weld metal composition of 12% …

… 56 … VAUTID Delta …

… en a encore beaucoup à venir. … FAITES CONFIANCE AU THE FILLER METALS SPECIALIST …

… Delta Heat Services est spécialisée dans l'exécution de traitements thermiques … disponibles sur: : www.delta-heat-services.com … Delta Heat Services, specialist treatement thermique industrial …