… Extreme hard and heat resistant alloy that offers excellent cutting properties … etc. The CEWELD MA HSS is only machinable by grinding. … 57-62 HRc hardfacing alloy for steel cutting knives, scissors, HSS, high speed …

… The corrosion resistant deposit with a medium hardness is resistant against impact wear as well as permanent stress …

… abrasion combined with impact. The deposit gives already a very good hardness in the second layer thanks to the Titanium carbides. The … on the base metal and not always necessary.  … HRc 54-59, hardfacing alloy for Cement crusher rollers, Mineral and brick industry, Hammers, Screw …

… to 550°C. as for similarly alloyed steels, quenched and tempered for cementation and nitrating. Hydrogen content: HD < 5 ml/100 g weld metal …

… sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then …

… as by C-Cr-B. Carbide deposits. The deposit gives a extreme high hardness, all spray metal requires no buffer layer except … deposits on parts subject to severe mineral abrasion. Applications: Cement industry, pumps, mixer blades, fans, sleeves, mixers, shear blades etc. …

… against metal to metal wear in hot working circumstances. The hardness is 45-53 HRc. Best properties are achieved with our …

… Guts B2 has a non conductive coating for excellent applicability in hard to reach places. … Gouging, Drilling holes, Remove old weld metal, …

… penetration this alloy is used mainly in construction and automotive industry. The silicon addition results in improved fluidity (wetting …

… steels in applications such as vessels, pipes and in the offshore industry with a minimum yield strength of 470 Mpa. The wire provides …