… temperature should be between 100°C (212 °F) and 150°C (302 °F) . As welding flux FL 155 should be used because of its high basicity and low …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, …

… impact levels. Very good weld deposit appearance and  outstanding welding properties on both AC and DC+ with a recovery of 200% for …

… A Rutile basic electrode for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% …

… SACW460-1W is a cored wire with micro-alloy elements, which enables welding of one side with one layer and layer counter layer with very …

… and promotes a ferritic micro-structure For the best results, welding must be done in a low heat input procedure and is not …

… UTP Böhler welding … 53 … SOUDOKAY Record EST 136 …

… Mo content, with low carbon content (less than 0.05%), to be used for welding creep resistant steels. … For 2.5%Cr-1%Mo-alloyed, …

… Excellent welding properties with high build-up capacity and low dilution rate. …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …