… and the electrodes can be bent very well to improve accessibility to hard to reach places.  … Rp< 380 MPa (52 ksi) ISO 15608: 1.1,1.2, (1.3) …

… flowing properties and capillarity.  Colour very similar to brass. Soldering seam can be easily electroplated. Self pickling on copper to copper joints. … Brazing of copper, copper alloys, brass, … L-CuPSn7 … A 5.8: BCuP-2 …

… Guts B2 has a non conductive coating for excellent applicability in hard to reach places. … Gouging, Drilling holes, Remove old weld metal, …

… to that of Rene 41 and generally superior to Inconel 718. Age hardenable while maintaining excellent high-temperature strength and …

… 2400 HV nickel based corrosion resistant hardfacing alloy containing 60% tunsten carbides. OA WC2 (Ni)  has … mixer plates in the brick and clay industry and on decanter screws or hardfacing deep drilling equipment. … OA WC2 Ni … 14700: T Ni20 …

… weld metal composition of 12% Chromium. These weld deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, …

… Very good corrosion resistance and high hardness due to the amount of „Cobalt“ even at higher temperatures. … and often used as economical alternative for „stellite“ .  … 48-50 HRc hardfacing alloy containing Cobalt for excelent metal to metal wear, …

… sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then …

… CEWELD® AlSi12 Tig was originally developed as a brazing alloy to take advantage of its low melting point and narrow …

… Easy to use brass alloy for brazing … Brazing: Steels, Copper, Cast iron, Copper Alloys, Nickel and for …