… Hardfacing alloy for cladding steel mill rollers, thermoshock resistant … for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface …

… Copper alloy, silver-alloyed-with a slightly higher percentage of phosphor, suitable … metal. High quality alloyed copper wire. The weld metal is a Copper-Silver alloy. Sound, pore free deposits and high electrical …

… maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first …

… Special alloy with age hardenable deposit and similar mechanical properties as the base metal. Age hardened condition: 720ºC for 8 Hours, furnace Cool 55ºC/hour to 620ºC …

… abrasion combined with impact. The deposit gives already a very good hardness in the first layer thank to the Nb carbides. The choice for … on the base metal and not always necessary. If applied correctly the hardfacing layer wil not show any cracks. … 55-60 HRc hardfacing alloy against shocks and mineral wear, Cement rollers and …

… deposit can be machined  with tungsten tool tips and by grinding. The hardness of the deposit will degrease 16% at 300°C and about 30% at … over a wide temperature range, and retains a reasonable level of hardness up to 500°C (930°F). … Examples include valve seats and gates; …

… Very good corrosion resistance and high hardness due to the amount of „cobalt“ even at higher temperatures. High hardness achieved in the first layer and often used as economical …

… abrasion resistance can be kept also with increased temperatures. For Hardfacing of more than 3 layers it is recommended to buffer with an … like CEWELD E DUR 350 Kb that delivers a welding deposit of less hardness. Overlays on steel with high tensile strength should be … resistant coating even in extreme humidity conditions! … Tubular Hardfacing alloy for Sugar Mill knives and Hammers, Clinker Crushers, …

… Very good deoxidization and high hardness similar to cast bronzes. Surfacing and joining of Copper and CuSn-Alloys. Widely used and recommended for oven soldering. High quality alloyed copper wire. Sound, pore free deposits … for virtually all welding procedures. Very good deoxidisation and high hardness similar to cast bronzes. Surfacing and joining of Copper and …

… The hardfacing contains sufficient special carbides formed with boron and … only by grinding. Stringer bead technique is recommended. The hard surfacing contains check cracks, but this does not impair wear resistance. … Cr-free Hardfacing alloy against extreme abrasion like …