… environments. Replaceable polyurethane tyres are mounted onto a cast steel drumdor durability and siperior traction. … Euroweld - RedRock …

… requirements for sub zero temperatures down to -60°C.  Suitable for steel types up to 550 MPa yield strength, excellent welding properties …

… of similar composition to itself or to other grades of stainless steel. ER383 contains a low maximum of carbon, silicon, and sulfur to …

… properties under pure Argon suitable for high strength fine grain steels in combination with excellent impact toughness at sub zero … 1.8914, 1.8927, 1.8931, 1.8928, 1.7147, 1.7149, 1.8734 S620Q, S620QL, S690Q, S690QL, S620QL1-S690QL1, 20MnCr65, 28CrMn4-3 L480 - L550, X65, X80, …

… carbon weld metal of about 23%Cr-13%Ni-2.3%Mo. Cladding on low alloyed steels,the weld metal already achieves approximately the composition of …

… spatter loss, easy slag removal. Suitable for economic welding of Mo-steels up to 500°C (932°F). … Typ 0,5Mo  ≤ 460 MPa,  ISO 15608: 1.2, …

… only one wire to cover more procedures up to 550 MPa yield strength steels. It can also be used for constructions that needs post weld heat …

… FL 155. Developed for welding cold tough, high tensile fine grain steel exceeding a yield strength of 890N/mm2. To obtain the requested … be adjusted by travel speed and preheat temperature. … S890 TM-pipe steels to StE 890 to S890QL1, A 517, X 120 high-strength fine grain structural steels (low temp) to StE 960 (StE 1100 to 12 mm) to S960QL1 (S1100 to …

… Kb that delivers a welding deposit of less hardness. Overlays on steel with high tensile strength have to be buffered with CroNi 29/9 HL …

… Higher corrosion resistance then standard Duplex steels with also higher mechanical properties due to the addition of Nitrogen. … Welding wrought, forged or cast super duplex stainless steels for service in the as-welded Condition. Heterogeneous welding between super duplex stainless steels and dissimilar welds between other stainless and mild or low …