… resistance to galling. It has cavitation-erosion resistance ten times that of 304 stainless steel, E Dur 12 can be used to protect …

… resistance to galling. It has cavitation-erosion resistance ten times that of 304 stainless steel, Dur 12 can be used to protect …

… deposit is capable of taking a high polish. Structure: Austenite with delta ferrite. This fluxcored wire offers higher productivity, higher …

… Welding instructions: - Preheating for sections >6 mm from 150 till 300 ºC is recommended. Use the normal standard welding techniques. …

… constructions that needs post weld heat treatment after welding and still offers mechanical properties confirming 5Y46 class. Due to the …

… 450°C and keep that also as interpass temperature. Slowly cooling down, for example in an oven. … 56-59 HRc hardfacing …

CEWELD® AA R690 was one of “The first seamless rutile FCW with extreme low hydrogen for S690” Excellent for use in positional welding where high deposition rate is required, suitable for temperatures down to -60 ºC ( with offshore Approval down to -40°C). Excellent for use on ceramic backing and …

… against heavy abrasion. Usualy the maximum number of layers is 2 till 3 but when using a special stringer build up technick with release …

… MPa. Under the different trade names there are many confusions, sometimes standard brass is called Manganese bronze and there are also …

… deposit is capable of taking a high polish.Structure: Austenite with delta ferrite … ISO 15608: 8.1 / TüV Groupe 29 (+22+21) / E347, 19 9 …