1. … words: you can always rely on us and our partners. We are THE FILLER METAL SPECIALIST … Dealer policy …
  2. … surfaces and self releasing slag. This wire deposits low carbon weld metal of about 23%Cr-13%Ni-2.3%Mo … ISO 15608: 8.1  Austenit ≤ 19 % Cr …
  3. … or under a surface deposit. Grade 12 has better elevated temperature properties than Grade 2 or 3 and is sometimes specified for pressure …
  4. … Due to the high resistance to cracking and toughness, all spray metal requires no buffer layer except on materials considered critical. …
  5. … cracking due to the high Mo content. During build-up welding, the weld metal already achieves approximately the composition of ASTM 316 in the …
  6. … High mechanical properties and very good weldability, suitable for high operating …
  7. … against seawater and general corrosion with excellent welding properties with self detaching slag.  … NF A 35-578 : Z 15 CN 24.13 …
  8. … The CEWELD® ER 80S-B2 Tig has low levels of tramp elements (e.g. Sn, As, Sb and P) providing a low Bruscato Factor(X < 10 …
  9. … against impact wear as well as permanent stress by heat influence, metal wear and high surface pressure  … 1.4317, 1.4313, …
  10. … production process the hydrogen content is below 3ml/100gr weld metal even after long storage in unconditioned condition. … Typ …