… feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …

… metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing a low Bruscato Factor(X < 10 ppm)for temper embrittlement …

… 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age … NiCu30Fe, NiCu30Al, Monel 400, R405, alloy K500 and dissimilar welding between these alloys. … NiCu30Mn … A 5.14: ERNiCu-7 … 18274: S Ni …

… of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; …

… Special alloyed copper wire for Mig and Tig welding.       The weld metal is a Cu-Al bronze with high aluminium … free deposits. … Suitable for seawater resistant applications. cladding steel and or copper alloys, cast iron and or bronze. Excellent for …

… parts and thicker plates should be preheated (150°C), prior to welding. At the same time, it keeps the benefits of being relatively …

… strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures … of the weld deposit. Weldable with Co2 and Mix gas. … Reh ≤ 960 MPa ISO 15608: ~3.1, 3.2 (Reh > 690 MPa) 1.8796, 1. 8925, 1.8940, 1.8983, …

… crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub zero temperatures down to -60 °C. …   Reh < 690 MPa Iso 15608: 3.2 ( 460 < Reh ≤ 690 MPa) 1.8914, 1.8927, 1.8931, 1.8928, …

… Foundries, production welding … Typ 1Cr0,5Mo,V ISO 15608: ~5,1 1.7335, 1.7262, 1.7728, 1.7218, …

… 2.4606) is a single-phase, austenitic Ni-Cr-Mo-W alloy offering outstanding corrosion-resistance in a range of severe environments. Its high …