… structure as by C.-Cr. Carbide deposits. The deposit gives a very good hardness, all spray metal requires no buffer layer except on materials … tubular wire for metal spray on a C-Ni-B- carbide basis for extreme hard deposits on parts subject to strong mineral abrasion. applications: Cement industry, pumps, mixer blades, sleeves, mixers, shear blades and …

… L-Ag27 is a Very good flowing, low-melting silver hard solder for operating temperatures from -200 °C to Max. 200 °C …

… CEWELD® E DUR 350 Kb is a Hardfacing electrode against high impact combined with abrasion. This …

… can sustain working temperatures up to 450°C and will offer a high hardness and wear resistance. … 1.4122 (G)X35CrMo17, Cast steels   … MA …

… weld metal composition of 12% Chromium. These weld deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, …

… the exception of the reduced carbon content. This results in lower hardness and strength values, which reduces the tendency to crack, …

… as by C-Cr-B. Carbide deposits. The deposit gives a extreme high hardness, all spray metal requires no buffer layer except … tubular wire for metal spray on a C-Cr-B- carbide basis for extreme hard and heat resistant deposits on parts subject to severe mineral abrasion. Applications: Cement industry, pumps, mixer blades, fans, sleeves, mixers, shear …

… and are used as a buffer layer for all other spraying alloys. Hardness, coating macro: approximately HRc 22. Maximum working …

… approx. 130% efficiency. The electrode is characterized by its tough hard and at the same time wear resistant deposition which offers high …

… (1875°F) and 1052°C (1925°F) for one hour, followed by precipitation hardening between 623°C (1135°F) … Suitable for precipitation hardening stainless steel used for welding materials of similar …