… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. AA …

… analysis. Excellent weld metal quality and X-ray soundness. When welding, care should be taken to minimize the heat input, because …

… guarantees optimum metallurgical  quality, economic positional welding and attractive welder appeal.Very good resistance against pitting …

… has increased resistance to lowangle erosion, abrasion, and severe sliding wear whilst retaining reasonable impact and cavitation resistance. …

… Excellent weldabillity in combination with FL 860 ESHC with high welding speed and deposition rate. The weld seam shows a fine rippled …

… metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing a low Bruscato Factor.(X …

… SA Nicro 625 has high strength and extreme corrosion resistance, including oxidation resistance and creep-rupture strength at elevated … Flux FL 860 ESHC … SA Nicro 625 is mainly used for ESW and SAW cladding of carbon steel to obtain corrosion and creep resistant layers. Go …

… wetting. Due to the excellent wetting and low melting point welding speeds can be achieved upto 2 mtr/min. The weld deposit offers a …

… 270ºC for the best results. The weld metal is only machinable by grinding.Weldable without gas (open arc). (Also weldable under M21 mixed …

… excellently suitable for root runs in vertical up position in pipe welding. The slag is self detaching and the special red coating was …