… weld metal composition of 12% Chromium. These weld deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, …

… used on wear pads, rotary seal rings, pump sleeves and centerless grinder work rests. Excellent gliding characteristics, … ER CoCr-C  / Co3 …

… optimum deposit rate and metallurgical quality and attractive welder appeal in the PA-PB position. Very good resistance against pitting …

… and 1052°C (1925°F) for one hour, followed by precipitation hardening between 623°C (1135°F) … Suitable for precipitation hardening stainless steel used for welding materials of similar chemical …

… Solid filler metal with excellent flowing properties under pure Argon suitable for high strength fine grain steels in …

… of Copper and CuSn-Alloys. Widely used and recommended for oven soldering. High quality alloyed copper wire. Sound, pore free deposits and … of Copper and CuSn-alloys. Widely used and recommended for oven soldering. Mat.n: 2.1016, 2.1020, 2.1030, 2.1050, 2.1052, 2.1056, 2.1080, …

… sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then …

… quality guarantees optimum metallurgical quality and attractive welder appeal. The weld deposit meets the NiCrFe-3 requirements. Better …

… be kept low (as for Mn steel). The weld deposit is offers strain hardening properties from 250 till 450 HB … austenitic manganese steel, …

… to type 304, high mechanical properties and good weldability, work hardening and cold-tough to -110°C. … 19% Cr / 9% Ni / 7% Mn, ISO 15608: …