… processing equipment in industrial furnaces. It's essential to consider specific operating conditions, temperatures, and the type of …

… as long as they have similar mechanical properties , same type of powder or coating, same nominal composition and equal or lower Hydrogen …

… optimum deposit rate and metallurgical quality and attractive welder appeal in the PA-PB position. Very good resistance against pitting …

… rutile slag with which X-ray weld seams are reliably achieved both under CO2 and mixed gas … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: …

… fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, …

… stainless steels operating at high temperatures (500-800°C) under long term creep conditions. This filler metal can also be used for …

… DC. The carbon content of the base metal should not exceed 0,45 % in order to avoid lack of fusion.  … Scratchers, Mixers, Deep drilling, …

… where improved corrosion resistance in specific media is needed. In order to reduce the propensity for fissuring and hot cracking, the low …

… In order to guarantee the advice you seek will be given by professionals who …

… all spray metal requires no buffer layer except on materials considered critical. In this  Situation …